Startseite ProdukteStromwandler

Magnetic Balance 2000A Hall Effect Current Transducer

Magnetic Balance 2000A Hall Effect Current Transducer

  • Magnetic Balance 2000A Hall Effect Current Transducer
Magnetic Balance 2000A Hall Effect Current Transducer
Produktdetails:
Zahlung und Versand AGB:
Min Bestellmenge: 100
Verpackung Informationen: Originalpackung
Lieferzeit: 1-12 Wochen
Zahlungsbedingungen: T/T
Kontakt
Ausführliche Produkt-Beschreibung
Bewertetes messendes gegenwärtiges IPN (a): 2000 Messbereich IP (a): 0~±3700
Dreht Verhältnis: 1:5000 Stromversorgungsspannung VC (V): × DC± (15~24) (1±10%) V
Bewerteter Messausgang ISN (MA): 400mA Stromaufnahme IC (@±24V) der Sekundärseite: ≤35mA+
Isolierungswiderstandsspannung: 12kVrms/50Hz/1min Linearitäten δL (@IPN, TA=25℃): ≤±0.1%
Markieren:

2000A Hall Effect Current Transducer

,

Magnetic Balance Hall Effect Current Transducer

NT2000C-S/SP1( NACL.2000B1-S4 ) current sensor

Product Details

product manual

The magnetic balance Hall current sensor is suitable for accurate measurement of AC, DC and pulsating current isolation. The primary side and the secondary side are completely insulated during measurement.

 

product advantages Applications Reference standard
High precision AC inverter AC EN50178
EN50155
Good linearity Battery powered
Low temperature drift Converter/Inverter
Broadband UPS/SVG
Quick response  

 

Main electrical parameters
Rated measuring current IPN (A) 2000
Measuring range IP (A) 0~±3700
Turns ratio 1:5000
Power supply voltage VC (V) DC ± (15 ~ 24) × (1 ± 10%) V
Rated measurement output ISN (mA) 400mA
Measuring resistance RM (Ω)  

70℃ 85℃

@ ± 15V, ± 2000A: 0Ω ~ 7.5Ω

@ ± 15V, ± 2400A: 0Ω ~ 4Ω

@ ± 24V, ± 2000A: 3Ω ~ 27.5Ω

@ ± 24V, ± 3700A: 0Ω ~ 3Ω

Secondary side current consumption IC (@±24V) ≤35mA+
Isolation withstand voltage 12kVrms/50Hz/1min

 

Accuracy-dynamic parameters
Basic error δi
(@IPN,TA=25℃)
≤±0.4%
Linearity δL
(@IPN,TA=25℃)
≤±0.1%
Zero output current IO
(@IP=0, TA = 25℃)
≤ ± 0.5mA
Zero temperature drift IOT ≤ ± 0.8mA (-50 ℃ ~ + 85)
Response time ≤1µS
di/dt accuracy >100A/us
Frequency bandwidth BW DC..100kHz

 

General data
Working temperature Ta -40℃~+85℃
Storage temperature Ts -45℃~+90℃
weight ≤1700g

 

Magnetic Balance 2000A Hall Effect Current Transducer 0

 

 

Mechanical characteristics
No tolerance ±1 mm
Sensor installation method one (recommended)

4 hole ø6.5mm

4 M6 steel screws

Recommended torque 4.5 N·m
Busbar size (recommended) Ø60.5mm
Secondary side electrical connection (RVVP3×16/0.15)

 

 

Remarks
1. When the measured current direction is consistent with the direction marked on the sensor, the sensor output ISN is positive.
2. The secondary side connection line of the product is preferably a shielded line. The shielding layer is close to the product end and the connection line can be connected to the case, and the negative power supply or power supply 0V.
3. The verticality requirements for the mounting screw holes of the power sensor: it is required to be level 8 or above (or below 0.06) in the national standard.
4. The flatness requirements for the installation surface of the power sensor:
(a). The flatness of the large plane installation is national standard 11 or above (or the flatness is less than 0.25mm);
(b). The flatness of the installation surface is designed with small round bosses It is required to reach the national standard level 12 or above (or the plane fluctuation is less than 0.5mm);
5. No tolerance ±1mm is noted;

 

Kontaktdaten
Xiamen Sincery Im.& Ex. Co., Ltd.

Ansprechpartner: Miss. Elaine

Telefon: +86 18150151931

Faxen: 86-592-2611505

Senden Sie Ihre Anfrage direkt an uns (0 / 3000)

Andere Produkte